Refrigerator Bin (Again!)

I noticed the repair of the right side of the lower bin was failing. (See Refrigerator Bins and Shelves Redo to read about the previous repair.)

I removed the Plastruct angle and the broken piece of the bin and then cleaned the epoxy from them.

I then reattached the broken piece using J-B Weld Plastic Bonder Epoxy.

After that I reattached the Plastruct angle with J-B Weld Plastic Bonder Epoxy.

I then cut a long narrow piece from the 12" x 12" sheet of 1/16" ABS plastic and attached it with J-B Weld Plastic Bonder Epoxy in order to reinforce the broken piece.

I also applied extra J-B Weld Plastic Bonder Epoxy on the edges of the under side of the broken piece.

Finally I curt cut another long narrow piece from the 12" x 12" sheet of 1/16" ABS plastic and attached it with J-B Weld Plastic Bonder Epoxy on the other side of the bin in order to reinforce the repair on that side.

I'm optimistic that the repair will hold this time.

Subscribe to this blog

If you post a comment, please identify yourself by using your Google account
(in which case you will receive an email telling you when I've responded),
or by including your name in your comment.

Please check out my other blog: John Link's Biking Adventures